INNOVATION DEFINES THE FUTURE...
PRODUCTS GUIDE
Two Piston Pneumatic Actuator
Vickers, test surface hardness of anodized hardening cylinder.
Raw material,
cylinder inspection test
with portable spectrograph.
Epoxy-polyester powder coating,end cap
test its adhesive force with cross-cut tester.
Epoxy-polyester powder coating, cylinder,test coating thickness with thickness gauge.
Salt spray test chamber, test anti-corrosion performance of the actuator surface.
Testing sealing performance under water after assembling actuator.
Surfagauge, test roughness inside the cylinder treated by anodized hardening.
Actuator Creep Test
Condition:
High temp. +120℃
Air supply 0.2bar
Object:
high temp. type actuator
-20℃ ~ +120℃
Actuator Creep Test
Condition:
Low temp. -40℃
Air supply 0.2bar
Object:
low temp. type actuator
-40℃ ~ +80℃
Salt spray test chamber, test anti-corrosion performance of the actuator surface.
Computer torque test board
test actuator's output torque values under different air pressure.
1 million cycles test
test for actuator life-span with 70% output torque loaded under 5.5 bar air supply.
Valve test system, to get the data of CV,
life-span and actuator actual specifications.
ABOUT US
CUSTOMIZATION
HELP CENTER
NEWS
CONTACT US
CopyRight 2016 © ZHEJIANG DINGFENG FLUID AUTOCONTROL EQUIPMENT CO.,LTD. All Rights Reserved. 23rd floor, Oushang Bldg, Louqiao Sub-district, Ouhai District, Wenzhou, Zhejiang, China